- Need Help? Call us at 575-623-8888
- Spa Chemicals
While Supplies Last
- Hot Tub Filters
- Spa Chemicals
While Supplies Last
- Hot Tub Filters
While water being put into a spa can look clear, however it may contain any number of metals and minerals that can cause problems and make your spa maintenance much harder.
For example high levels of calcium in your water can clog your spa’s plumbing, destroy heaters & jets, create a sandpaper like film on the surface of your spas seats and much more.
Dissolved copper in the water can initially be colorless but after coming into contact with a sanitizer such as chlorine or an ozone system will oxidize and turn the water green and can stain the surface of your spa.
Sulfur in spa water can give off a rotten egg smell.
These are just a few of the things you may be adding to your spa that you are unaware of. This is why using a pre-filter to fill your spa is an essential step.
The X10 Filter is an advanced pre-filter for spa water that reduces metals and minerals from the water you are adding to your spa, before they can cause you problems. This filter is uniquely made of 7 different filter materials.
The X10 contains sediment pads that filter out particles down to a 5 micron (0.00019685 in/0.0005 cm) size.
This filter uses the highest grade coconut shell carbon to help filter the water.
The KDF Filter media helps to improve the efficiency of the carbon filter, and control bacteria.
The X10 filter reduces the amount of iron, copper, calcium, sulfur, and aluminum that get put into your spa when filling.
The X10 Filter is guaranteed to filter 10,000 Gallons (37,854 Liters) of water before needing to be replaced.
| Weight | 2 lbs |
|---|---|
| Dimensions | 3 × 3 × 11 in |
$69.99
18 in stock
18 in stock
